Logimove Operation Manual - S15,S20-Web - REV05
Safety Tests to be Performed at Intervals & After Unusual Incidents: The truck must be inspected at least annually (refer to national regulations) or after any unusual event by a qualified service technician The manufacturer offers a safety inspection service which is performed by personnel specifically trained for this purpose. Spare Parts: Only original spare parts have been certified by our quality assurance department. To ensure safe and reliable operation of the Pallet truck, use only the manufacturer’s spare parts. Used parts, oils and fuels must be disposed of Tyre Replacement: Any repairs or maintenance to the truck must be performed only by trained and authorized Troubleshooting: If the fault cannot be rectified after carrying out the remedial procedure, notify the Manufacture’s service department, as any
A complete test must be carried out on the technical condition of the truck with regard to safety. The truck must also be examined thoroughly for damage. The operating company is responsible for ensuring that faults are rectified immediately.
in accordance with the relevant environmental protection regulations. For oil changes, contact the manufacturer’s specialist department.
technicians. Remove and install the tyres see the service manual.
further troubleshooting can only be performed by specially trained and qualified service technician.
Fault
Probable Cause
Action
Truck does not start.
Check the battery connector and connect if necessary.
Battery connector not plugged in.
Key switch in “0” position.
Set key switch to “I”.
Incorrect Can Code.
Check code.
Check battery charge battery if necessary.
Battery charge too low.
Faulty fuse.
Check fuses.
Truck in charge mode.
Interrupt charging
Load cannot be lifted
Charging capacity below 15%
Charging the battery
Carry out all measures listed under. “Truck does not start”.
Truck not operational.
Hydraulic oil level too low.
Check the hydraulic oil level.
Faulty fuse.
Check fuses.
Logimove Fully Electric Pallet Jack 31
Made with FlippingBook - Online magazine maker