Logimove Operation Manual - S15,S20-Web - REV05

1.2.3 KEY SWITCH

Connect and disconnect control current. • When the key is in the “OFF”, position the control current of the truck will be disconnected.

• When the key rotates to the “ON”, position the control current of the truck will be connected. The illuminated red light (1) indicates normal operation.

1

OFF

ON

1.2.4 DISPLAY INSTRUMENT

Display Instrument(4). The green light indicators will light up when the supply plug is engaged. Four constant green lights indicates full charge. When only one light indicator is lit the battery charge is low and should be recharged immediately. If the lights are flashing this may indicate a fault, (Please See page 32(S15), 33(S20) for fault diagnosis chart)

Warning When the only residual light indicator (4) is flashing, the truck will be power off.

4

Notice It is normal that the light indicator will still be on when the key switch is turned off and the supply plug is not pulled out.

Notice Only in the static state of S15 / S20 can the battery capacity be accurately observed via four indicator lights .

Logimove Fully Electric Pallet Jack 14