Logimove Operation Manual - S15,S20-Web - REV05

1.2.2 CONTROL HANDLE

4 3

8

Front View

1

5

2 7

6

7

1

Key switch

Connect and interrupt control current.

When the key is in the ON position the red indicator light will show. A flashing red light indicates an error. (see page 32(S15), page33 (S20) for fault diagnosis.)

2

Fault indicating light

Send out sound warning signals

3

Horn button

Raises the load device. When the battery is consumed about 85%, lifting function will be locked.

4 5 6

Lift button

Lower button Drive switch

Lowers the load device.

Controls travel direction and speed

If the control lever is set to the brake zone(B), & press creep speed switch and drive switch at the same time, then the vehicle will move at a low speed. When reversing if the emergency switch is pressed, truck will “STOP” and move forward

7

Creep speed switch

8.

Emergency / Safety Switch

Logimove Fully Electric Pallet Jack 13