Sitecraft Catalogue

DUMPMASTER BIN TIPPERS Dumpmaster Bin Tippers empty bins from floor level effortlessly with the simple push of a button - the safe alternative with no bending or lifting required by the operator. The Standard Dumpmaster can empty bins up to 250kg (Single phase unit 200kg). The Dumpmaster is safe to use with the bins raised vertically, then gently rolled forward when they reach tipping height. The compact design of the Dumpmaster uses minimum space and is much safer than tippers that rotate the bin around a fixed point. The bin and cradle comes down by gravity. > > The tipping cradle is suitable for use with 80,120,140 & 240L wheelie bins as standard > > Cradles are available to handle drums and a wide range of baskets, trays and crates > > A range of doors, additional guarding and different styles of guarding is available to suit almost any application or requirement > > Dumpmaster’s are available either completely constructed from stainless steel or with selected components made from stainless steel > > Controls can be fitted to either side or at the rear of the Dumpmaster > > Optional Bin Hooks and tipping chutes are available > > Any tipping height to 6 metres > > Compressed - Air operation available to facilitate use in hazardous environments > > Dumpmaster’s can be fitted with a Solar Panel allowing bins to be emptied using solar power alone. > > Any tipping height up to 6000mm is available on request > > Available with category 3 safety systems

85 85

Easy operation Simply wheel the bin onto the cradle and press the ‘up’ button. When the bin has emptied, press the ‘down’ button. > > There’s no need to strap or clamp the bin > > Stop the machine at any time by taking your finger off the button

Choose your power source Choose either battery, air, single-phase, or 3-phase power source. Battery powered models have a built-in automatic charger and can empty up to 12 tonnes of product on a single charge (depending on tip height, and battery condition). Standard DUMPMASTERS may be used outdoors. Machines can be simply upgraded to suit more severe environmental conditions. Galvanised or stainless steel frame options DUMPMASTERS usually have a fully hot-dip galvanised steel frame with zinc-plated guarding. They can also be supplied partially or entirely from stainless steel for food and pharmaceutical applications. DUMPMASTERS are virtually maintenance-free.

Easy to move DUMPMASTERS have four castors for total manoeuvrability. Standard wheels are rubber-tyred, 100mm diameter, with ball bearings for ease of moving. The front two castors have brakes that lock both the wheel and swivel mechanism.

STANDARD SPECIFICATIONS

Frame width

920mm

Overall width

950mm

Length (full cage-guarding)

1150mm

Height

Tipping Height + 1065mm

Capacity

250Kg

Castors

100mm Ø