Sitecraft Catalogue

COMPAC CLAMPING & ROTATION ATTACHMENTS Used for gripping loads by the diameter or

circumference such as reels, drums, barrels etc and rotating to any position through 360° in sideways rotation.

46

46

Mechanical Rotation The Clamp Spindle can be

Powered Clamping Powered Clamping can be supplied as an option on any Clamp Attachments providing effortless operation and controlled clamping pressure.

supplied with a hand operated mechanical gearbox to provide effortless and controlled rotation. This option is particularly useful for bulky or heavy load.

COMPAC FORWARD TIPPING ATTACHMENTS

COMPAC ANTI-TELESCOPING CLAMP ATTACHMENTS Some types of reels can telescope easily when handled using the core only. The double clamping vertical spindle allow the operator to lift and rotate reels of material using the core with the vertical spindle, but also clamp the diameter of the reel with two adjustable clamps. The clamps are easy to use and prevent any telescoping of the material on the reel. This mechanism uses torque units to ensure the reel’s material is not damaged whilst being handled, but also to ensure sufficient grip is applied.

The Geared Manual Forward Tipping option design provides the operator with full control when tipping the barrel forwards. The worm and wheel gearbox will hold the load at any given angle. The rotation takes place by rotating the front handwheel. The high gear ratio means that the effort required is significantly reduced making this a great option for any operator. The barrel pads are lined with rubber to ensure a secure grip. Depending on the item being lifted greater clamping torque can to provided to eliminate telescoping or slipping as the lifting takes place.