Sitecraft Catalogue

10,500 LITRE SAFE FILL CAPACITY SELF BUNDED DIESEL TANK > > The ET Series is a premium fuel storage solution designed for harsh operating environments with minimal site preparation. > > Pressed corners and a reinforced top means a robust tank for your fuel storage needs. > > All steel construction -designed for the most demanding applications in mining, heavy contracting, service station, rental and agriculture. > > Self bunded (double wall) internal tank and external bund.

> > CSC Certified as 10Ft High cube ISO shipping container with corner locking castings. Suitable for transport via ship, rail and road. > > Constructed to Australian Standards AS1692-2006, AS1940-2004 and AS165 > > Calibrated dipstick for internal tank contents measurement. > > Interstitial dip stick for bund monitoring. > > Bunded pump bay with dual heavy duty lockable doors. > > Galvanised ladder for access to platform above bunded pump bay. Can be located on either side of the tank (Ex-factory) to suit the installation. Ladder includes galvanised bridging stair tread for access to platform > > Suitable for static/onground storage only of diesel fuel and lubricant oils (non-flammable). > > Suitable for outdoors storage only. > > Dimensions: 2991mm Long x 2438mm Wide x 2896mm High.

31,000L CONTAINER TANKS - ET RANGE > > Incoming pipe work, male camlock, cap, 80mm Fire safe ball valve, wafer check valve, Mechanical overfill prevention valve and electronic audible / visual alarm. Safe Fill level 95% of gross capacity. > > Discharge pipe work with anti-syphon valve. Allowance for submersible pump installation in the manhole covers. All pipe work colour coded UN specification. > > Bunded pump bay on the front of the tank c/w drain point, valves, optional hose mast provision to each side. Internal floor joist for pump mounting and optional brackets for components mounting. > > Galvanised Access 600mm and Hatch covers complete with gaskets. Stainless steel plugs. Tank design with two access covers. > > Tanks include corner container lock castings for ease of transport.

156 156

> > Permanent Galvanised ladder installed that can be located on either side of the tank (Ex- factory) to suit the installation. Ladder includes galvanised bridging stair tread. Galvanised kick plate and middle rail provided. > > Morrison emergency vent in interstitial vent. > > Calibrated Dip stick and cover supplied. > > Updraft vent riser galvanised and fittings supplied. Suction port 50mm c/w drop pipe fitted as standard. > > All statutory signage supplied. > > Factory paint coating Hempel Hempthane with Hempel Zinc as primer coating. Marine Grade Painted to 3 part 120um cover. Sand Blasted to SA2.5. > > Dimensions: 6058mmL x 2438mmL x 2896mmH.