Logimove Operation Manual - S15,S20-Web - REV05

4.15 SERVICE

Service Daily Maintenance No.

Method of operation

Maintenance content

Note

Check if battery capacity is too low

Check instrumentation SOC display

Make sure the battery is not stored without charge for a long time. If the battery system needs to be put on hold for a long time, it is best to keep the battery in half power state and charge the battery every 3 months to ensure that the battery system is in half power state. Make sure battery pack charge and discharge current meet with operation manual

1

Everyday

Check instrumentation display

2 The battery pack

charge and discharge current

Everyday

Perform a visual inspection

If any ablation or deformation occurs in daily inspection, the battery connector pins should be replaced in time.

3 Connector pins at the bottom of the battery(if necessary)

Everyday

Perform a visual inspection

Check the reason for analysis and give it a fix

4 Check whether

the appearance is deformed, whether the surface is oxidized, paint removing, the mounting position is offset, and the cabinet is damaged; battery as well as the surface beneath it for signs of fluid leakage.

Everyday

Perform a visual inspection

Check the reason for analysis and give it a fix

5 Check the entire

Everyday

Perform a visual inspection, Wear insulated gloves & shake it gently

Make sure it tight

6 Maintenance content Method of operation

Note Frequency 6 Clean the lithium battery and charger with a dry cloth or compressed air.

Weekly

Logimove Fully Electric Pallet Jack 49