Logimove Operation Manual - S15,S20-Web - REV05

3.3.3 HOW TO ADD HYDRAULIC OIL

• It is necessary to add hydraulic oil when you heard explosion sound from pipe during lifting. • Prepare the truck for maintenance and repairs (See Maintenance Instructions). • Remove the hydraulic cover. (Chapter D. See Section3.3.2 page 37).

• Add hydraulic oil of the correct grade (Lubricants Table). • Add hydraulic oil till you can’t hear explosion sound during lifting any more. • Re-installation in the reverse order.

3.3.4 HOW TO ADD GREASE

• Prepare the truck for maintenance and repairs (See Maintenance Instructions ). • Remove the driving cover. (Chapter D. Section3.3.2 page 37).

• Add grease of the correct grade (Chapter D. Section 3.2 Lubricants Table, page 36). • Re-installation in the reverse order.

It is forbidden to add hydraulic oil with impurity.

3.3.5 CHECKING THE FUSES

• Fully lower the forks. • Pull out the supply plug. • Remove the hydraulic cover (Chapter D. Section3.3.2 page 37).

• Fuse 5A installed on main harness. Replace if necessary,

Logimove Fully Electric Pallet Jack 38