Logimove Operation Manual - S15,S20-Web - REV05

1.3.10 OPERATING THE TRUCK WITHOUT ITS OWN DRIVE SYSTEM

If the truck has to be moved after a failure has rendered it immobile, proceed as follows: • Pull out the supply plug. • Set the key switch “OFF” and remove the key. Prevent the truck from rolling away. • Remove the cover. • Screw in two screws(1), M4*35mm until the truck can be moved (no braking action).

1

• After setting down the truck at the destination, unscrew two screws(1). • Braking action is restored.

Warning This operating mode is not permitted when negotiating inclines and gradients.

Logimove Fully Electric Pallet Jack 25