Logimove Operation Manual - S15,S20-Web - REV05

1.3.7 LOADING

Transporting Loads Always carry loads in the forward direction of travel (R) in order to have the best visibility. When carrying a load on a slope, always ascend or descend with the load uphill. Never drive sideways across a slope or perform a U-turn. Reverse travel (F) is to be used solely for unloading. Since visibility is reduced when travelling in this direction, drive only at very slow speed.

Procedure: • Approach the load carefully. • Adjust the height of the forks until they can be easily inserted into the pallet. • Insert the forks under the load. • If the load is shorter than the forks, position the forks so that the front of the load overhangs them by a few centimeters, to avoid interference with the load immediately ahead. • Raise the load a few centimeters above its support. • Back the truck away from the stack or any neighboring loads, gently and in a straight line.

F

R

Unloading • Carefully drive the truck to the desired location. • Carefully drive the truck to the unloading area. • Lower the load until the fork arms are free from the pallet. • Back the truck away in a straight line. • Raise the forks to proper height.

Caution If the field of vision is poor, ask a guide for assistance.

Logimove Fully Electric Pallet Jack 22